MicroTec-4.12 for Windows 95/98/NT/2000/ME/XP release note Siborg Systems Inc 24 Combermere Crescent, Waterloo, Ontario, Canada Phone 519-888-9906 Fax 519-725-9522 E-mail microtec@siborg.ca Web www.siborg.ca November 30, 2006 This archive contains a complete set of MicroTec-4.12 software package for 2D semiconductor process and device simulation. A limited capability version of MicroTec is a freeware. You will need to register to enable full functionality of the package. The software is supplied "as is" without any accompanying support or maintenance from Siborg Systems Inc. Under no circumstances will Siborg assume any responsibility resulted from the use of the software. MicroTec was used for educational purposes by more than 100 Universities in 28 countries including University of California at Berkeley, University of Waterloo, Tokyo Institute of Technology, etc. MicroTec was also used by more than 30 semiconductor companies including National Semiconductor, Hitachi, Matsushita, General Electric and NTT. MicroTec limited capability version You may run MicroTec without registering it. In this case it will run in a limited mode where you can run any process simulation in a fixed domain 0.7 by 0.7 microns. You will also be able to simulate an NMOSFET with 1 um Leff and Tox of 0.02 um. You cannot change the transistor structure, e.g. location of electrodes, doping distribution and the domain size, but you can change the voltages, number of nodes, model parameters etc. Without the registration, for all other device simulation examples included in the distribution package you can only plot the simulation results and edit the input data. Do not try to run these examples because the doping distribution and geometry of the simulated device will still be that of the NMOSFET. MicroTec-4.12 for Windows 95/98/NT/2000/XP installation note This note describes installation of MicroTec using E-mail. 1. Run MT412.EXE and follow instructions on the screen 4. Register you computer using "install_gui_mt.exe" command. Select "Register" and type-in the Registration Code which you may request from microtec@siborg.ca, fill-in all required information and click on "Register". File "inst.pas" will be created which should be E-mailed to microtec@siborg.ca for activation as an attachment by E-mail. We will then register your computer and send you activated "inst.pas" file. Please include the name of the contact person, phone and Fax numbers to facilitate communication should it be required. Keep a copy of the "inst.pas" at all times. Save the received "inst.pas" in the MT412 directory and run "install_gui_mt.exe" again, but now select "Install". This will complete the installation procedure. For more information visit http://www.siborg.ca or contact our agents: Japan: InterSoft Corporation, 6-26-17, Sakae-cho Tachikawa, Tokyo 190-0003 Japan Tel: 042-538-2682 Fax: 042-538-2680 e-mail: takahashi@intsoft.co.jp http://www.intsoft.co.jp/ Taiwan: Tinotek Corporation, 217 Kao Tsui Road, Hsinchu City Taiwan, R.O.C. Phone (886) 3-578-8446, Fax (886) 3-578-8443 E-mail tino@shts.seed.net.tw http://www.tinotek.com.tw/ India: KEMS Software 725 10th Main 4th Block, Jayanagar Bangalore 560011 India Phone 91-80-663-5356, Fax: 91-80-664-1304 E-mail: kems@vsnl.com http://www.kemsindia.net/kemssoftware.htm Russia: Siborg Russia P.O. Box 390023 Ryazan-23, Russia Phone 7-0912-253-273 Fax: 7-0912-253-273 E-mail: info@siborg.ru http://www.siborg.ru/